Maintenance & Care - Bissell PET HAIR ERASER TURBO Quick Start Manual

Clean/Replace Pre-Motor Filters
WARNING
To reduce the risk of electrical shock, turn power switch OFF and disconnect polarized plug from
electrical outlet before performing maintenance or troubleshooting checks.
WARNING
Do not operate vacuum with damp or wet fi lters. Allow components to dry before reassembling the
Dirt Tank.
1
Press the Dirt Tank Release Button
and pull away from vacuum.
3
Remove Pre-Motor Filter from top
of Dirt Tank lid by pulling out.
NOTE: Replace fi lters every 3 to 6 months. Visit BISSELL.ca for fi lter replacements.
10
www.BISSELL.ca
2
Twist tank cover to the unlock position and
then pull up on handle.
4
24h
Both Pre-Motor Felt and Foam Filters are
washable. Clean with mild detergent, rinse
and squeeze all excess water. Allow filters
to dry completely before reinserting. Return
Pre-Motor Filters to the top of the Dirt Tank,
placing the thick Foam Filter in last.