Bissell CROSSWAVE 2203 Series User Manual page 11

Maintenance:
Brush Chamber
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
NOTE: Before you begin, turn off the machine and unplug it from the outlet.
1
3
With warm water, rinse
your brush roll window
and brush roll.
TIP: Running your machine with a wet brush roll will help the brush roll dry faster.
6
Replace brush roll by inserting the brush
roll end into the right side of the foot.
Then lock the pull tab into place by
pressing downward.
Cleaning the Brush Roll and
Grasp brush
roll window at
the front and
pull upward to
remove.
4
If your brush roll chamber
is dirty, clean with a rag
or towel.
2
5
Let your brush roll
and brush roll window
chamber dry before
reassembling.
7
Replace the brush roll window by first
lining up the brush window tabs with the
edges of the foot. Then press the window
back into place until you hear a click.
Pull brush roll
out by grabbing
the brush roll
tab and pulling
upward.
www.BISSELL.com
11