Bissell CrossWave 1785 Series Quick Start Manual

QUICK START GUIDE
CROSSWAVE
Quick Start Usage Instructions
click
1. First, insert the handle at
the top of the body of the
machine until you hear a
click.
160-8628 Rev 12/15
2ND WATER
FILL LINE
2ND FORMULA
FILL LINE
2. For small area cleaning 3. On the back of the
(<300 sq ft), fill the clean
water tank with hand
hot tap water to the
first water fill line. Then
add formula to the first
formula fill line.
For large area cleaning
(up to 600 sq ft), fill the
clean water tank with
hand hot tap water to
the second water fill line.
Then add formula until
you get to the second
formula fill line. Screw the
cap back onto the clean
water tank.
™
4. Turn machine on by
machine, align clean water selecting the type of floor
tank with the grooves and you will be cleaning. For
slide tank into place until hard floors, choose the
you hear a click. HARD FLOOR button and
for area rugs choose the
RUG button.
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
HARD FLOOR
BUTTON
RUG
BUTTON
5. Each time you use
the product, hold the
solution trigger for 10
seconds to prime the
system with cleaning
solution before you begin
cleaning. When you pull
the trigger, LED lights will
illuminate.
When solution is flowing,
you will see bubbles
forming at the edges of
the brush roll window.
1785, 1713 SERIES