Bissell CROSSWAVE 2203 Series User Manual page 10

Maintenance:
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
8
If the inside area where
the dirty water tank sits
is dirty, wipe it clean
with a rag or towel.
NOTE: Make sure to clean your dirty tank and let all components dry out after
each use to keep your product at its best.
11
Once parts are dry, reassemble and
replace the top of dirty water tank.
10
www.BISSELL.com
Empty Dirty Water Tank
9
Leave parts out to dry.
12
Angle the dirt tank back into body of
machine inserting bottom first. Then
tilt the top of the dirt tank toward the
machine and push into place until you
hear a click.
10
Place vacuum filter back
into dirty water tank top.