Table of Contents
Advertisement
Available languages
Available languages
9
Restore factory settings
The factory settings of the device can be restored.
If you do this, you will lose all your settings.
To restore the factory settings of the weather sensor,
please proceed as follows:
Loosen the cover of the main sensor (E) by turn-
•
ing the cylinder clockwise and pulling it down-
wards.
•
Remove a battery.
•
Insert the battery and press and hold down the
system button (I) at the same time using a point-
ed object, e.g. a pen (see fig. 3) until the system
LED (H) quickly starts flashing orange.
•
Release the system button again.
•
Press and hold down the system button again un-
til the system LED lights up green.
•
Release the system button to finish restoring of
the factory settings.
The system LED stops flashing and the device performs
a restart. After the restart, you can again integrate your
device into your Homematic IP system.
Restore factory settings
55
Advertisement
Chapters
Table of Contents
