Maintenance And Cleaning; General Information - HomeMatic HmIP-SWO-PL Mounting Instruction And Operating Manual

Weather sensor – plus
Table of Contents

Advertisement

Available languages

Available languages

Maintenance and cleaning

10
Maintenance and cleaning
10.1

General information

This device does not require you to carry out any
maintenance other than replacing the battery and
cleaning the device when necessary. Enlist the
help of an expert to carry out any maintenance or
repairs.
The weather sensor will need to be cleaned from time to
time to remove the dirt that will accumulate on it. When
you do this, you should also check that the wind sensor
can move easily and that the sensors are properly seated
on their supports.
Clean the product using a soft, lint-free cloth that is clean
and dry. You may dampen the cloth a little with lukewarm
water in order to remove more stubborn marks. Make
sure that no moisture will ingress into the housing. Do
not use any detergents containing solvents, as they could
corrode the plastic housing and label.
Check that your product is safe from a technical
point of view (that the housing is not damaged, for
example) on a regular basis. If you have reason to
believe that it is no longer safe to operate the de-
vice, put it out of service. Remove the battery pack
to safeguard the device against unintentional op-
eration.
56

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Hmip-ek-6

Table of Contents