Teaching-In - HomeMatic HmIP-SWO-PL Mounting Instruction And Operating Manual

Teaching-in

6 Teaching-in
Please read this entire section before starting
the teach-in procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of oth-
er Homematic IP devices within your system. For
further information, please refer to the operating
manual of the Access Point.
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2. For detailed information, please refer to the
Homematic IP User Guide, available for download
in the download area of www.eQ-3.de.
To teach-in the weather sensor to the Access Point,
please proceed as follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item "Teach-in device".
• Loosen the cover of the main sensor (E) by turn-
ing the cylinder clockwise and pulling it down-
wards.
• Insert three 1.5 V LR6/mignon/AA batteries into the
battery compartment (J) (see figure 4) to activate
the teach-in mode.The system LED (H) starts flash-
ing. Pairing mode remains activated for 3 minutes.
48