B means JESD204B, and C means JESD204C. Note that Rx mode applies to the ADC data path (or JESD204 Tx/JTx), and Tx mode applies to the DAC data path (or
JESD204 Rx/JRx). For more information about the JESD204B or JESD204C modes, refer to the UG-1578, System Development User Guide for the AD9081 and AD9082
Direct RF Sampling Transceivers.
2
B means JESD204B, and C means JESD204C.
In Table 3, N/A means not applicable.
Table 3. Use Cases for AD9988-FMCBA-EBZ Board View (Uses 122.88 MHz On-Board Crystal Oscillator, All Single Link)
Clock (GHz)
Description
Tx
Rx
mmWave 5G,
11.79648
2.94912
4T4R single
band,
983.04 MSPS
I/Q
mmWave 5G,
11.79648
2.94912
4T4R single
band,
1474.56 MSPS
I/Q
11.79648 GSPS
11.79648
2.94912
DAC,
2.94912 GSPS
ADC,
245.76 MSPS
I/Q
Dual Band
5.89824
2.94912
Setup,
5.89824 GSPS
DAC,
2.94912 GSPS
ADC,
368.64 MSPS
I/Q
NCO Test
11.79648
N/A
Mode
1
B means JESD204B, and C means JESD204C. Note that Rx mode applies to the ADC data path (or JESD204 Tx/JTx), and Tx mode applies to the DAC data path (or
JESD204 Rx/JRx). For more information about the JESD204B or JESD204C modes, refer to the UG-1578, System Development User Guide for the AD9081 and AD9082
Need help?
Do you have a question about the EVAL-AD9081 and is the answer not in the manual?
Questions and answers