Subscribe to Our Youtube Channel
Related Manuals for Analog Devices ADRV9029
Summary of Contents for Analog Devices ADRV9029
- Page 1 ADRV9029 DPD GUI setup SW ver 5.0.0.68 18 February 2022 Analog Devices Confidential Information. ©2020 Analog Devices, Inc. All rights reserved.
- Page 2 The ORX power should be around -20 to -25 dBm , You can add attenuators after Splitter to get the ► required level as needed. Power Meter ADRV9010 EVAL DPD Output ATTN SPLITTER ADRV9010 DPD Tx DPD / Ext LOL ORX1 18 February 2022 Analog Devices Confidential Information. ©2020 Analog Devices, Inc. All rights reserved.
- Page 3 ► recommended to turn off the PA during the course of programming to avoid any damage from high amplitude data transmitted during intial calibration(For TxQEC etc.). 18 February 2022 Analog Devices Confidential Information. ©2020 Analog Devices, Inc. All rights reserved.
- Page 4 (-20 to -25 dBm). Uncheck ORx Enable in the GUI so that it is not in user mode anymore, and it is available for DPD ► tracking calibration. 18 February 2022 Analog Devices Confidential Information. ©2020 Analog Devices, Inc. All rights reserved.
- Page 5 Madura DPD sequence Step 1: Load model file from PC Step 2 : Configure DPD tracking parameters. (start with default). Step 1 Step 2 18 February 2022 Analog Devices Confidential Information. ©2020 Analog Devices, Inc. All rights reserved.
- Page 6 From Transmit tab of G Step 9: Enable DPD on select channels. Step 10 . Reset DPD Step 11 Go to Tranmsit tab and send data. Step 12. Get status. 18 February 2022 Analog Devices Confidential Information. ©2020 Analog Devices, Inc. All rights reserved.
Need help?
Do you have a question about the ADRV9029 and is the answer not in the manual?
Questions and answers