Safety Instructions - HBM C9C Mounting Instructions

1

Safety instructions

C9C
Intended use
Force transducers in the C9C type series are designed
solely for measuring static and dynamic compressive
forces within the load limits stated in the specifications.
Any other use is not appropriate.
To ensure safe operation, it is essential to comply with
the regulations in the mounting instructions, the safety
requirements listed below, and the data specified in the
technical data sheets. It is also essential to observe the
applicable legal and safety regulations for the application
concerned.
Force transducers are not intended for use as safety
components. Please also follow the instructions in the
"Additional safety precautions" section. Proper and safe
operation of force transducers requires proper
transportation, correct storage, siting and mounting, and
careful operation.
Load carrying capacity limits
It is essential to comply with the information in the
technical data sheets when using force transducers. In
particular, the respective maximum loads specified must
never be exceeded. The following limits set out in the
technical data sheets must not be exceeded
S Limit forces
S Lateral limit forces (by oblique application, if
necessary)
S Exceeding the permissible eccentricity of force
application
S Breaking forces
A3729-2.2 HBM: public
Safety instructions
3