General Application Instructions - HBM C9C Mounting Instructions

3

General application instructions

C9C
Force transducers are suitable for measuring
compressive forces. They provide highly accurate static
and dynamic force measurements and must therefore be
handled very carefully. Particular care must be taken
during transportation and installation. Dropping and
knocking the transducer may cause permanent damage.
C9C series force transducers have a convex force
application part, to which the forces to be measured must
be applied.
The Specifications section 9 on page 26 lists the
permissible limits for mechanical, thermal and electrical
loading. It is essential to observe these limits when
planning the measuring set-up, during installation and,
ultimately, during operation.
A3729-2.2 HBM: public
General application instructions
11