Table of Contents
Advertisement
Fitting the burner to the boiler
The burner is shipped with the head included to avoid damage during transport. Please follow the following assembly steps/sequences:
ATTENTION: The burner must not be ignited without the combustion head, gas ramp and all necessary connections and
checks having been made.
A
PART III: INSTALLATION
PHASE 1
Position the head and secure it with the nuts.
NB. Position the head according to the reference
given by the pin on the flange.
PHASE 2
Insert the refractories into the pin and screw in
Attention: respecter la séquence/ordre des isola-
teurs.
Attention: handle with care and do not crush the
0
refractory.
1
2
3
4
PHASE 3
Insert the electrodes into the appropriate slots
Attention: check electrode positioning as per
maintenance chapter.
A
15
Advertisement
Table of Contents
