Advertisement
Arize Element
L1000 Gen2
®
2 Installation of the Driver
2.1 Installation of Driver Bracket
If not preassembled, install driver bracket onto driver.
Bracket
1
Orient driver perpendicular to the bracket.
3
Squeeze bracket arms together & slide
hook into first driver mounting hole.
5
Let driver swing free upright & ensure
hooks on both sides are correctly engaged.
LED.com
© 2023 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the
General Electric Company and are used under license. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
2
Ensure first end of bracket hook is lined up with
oval mounting hole of driver.
4
Repeat on opposite driver mounting hole.
Installation Guide
Page 9 of 15
(Rev 06/20/23)
HORT158 | DOC-2000991
Advertisement
