Advertisement
Arize Element
L1000 Gen2
®
RISK OF ELECTRIC SHOCK
• Turn power OFF before inspection, installation or removal.
3.2.1 Connect the Driver Input
Align keying features on driver
1
with connector on the selected
leader cable.
NOTE: To disassemble connectors, insert
and twist a small blade screwdriver and
then separate connectors.
3.2.2 Using Custom AC Inputs
If you choose to use your own custom
AC input connection, use a Wieland
RST20i3 green connector (96.031.4055.7
OR 96.031.4155.7 OR 96.031.0055.7 OR
96.031.1055.7) and plug into the male AC
connector of the driver.
WARNING / AVERTISSEMENT
RISQUE DE CHOC ELECTRIQUE
• Coupez l'alimentation avant l'inspection, l'installation ou la désinstallation.
CLICK!
Push connectors together until
2
a click is heard.
2
>PA<
PE
Connector pin-out
3.2.3 Connecting Driver to AC Line
Connect the green wire to the incoming ground
conductor. Connect the black wire to Line 1 and white
wires to Neutral or Line 2 of the incoming AC line.
LED.com
© 2023 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the
General Electric Company and are used under license. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
Installation Guide
Recommended: secure AC
3
input leader cable.
1
Pin
Line-to-Line Voltage
1
L2
L1
2
L3
L2
PE
PE
PE
L=Line / N=Neutral / PE=Protective Earth
AC line
To driver input
Line-to-Neutral Voltage
L1
L1
L2
L3
L3
N
N
N
PE
PE
PE
PE
Page 13 of 15
(Rev 06/20/23)
HORT158 | DOC-2000991
Advertisement
