Download Print this page

Installation; Quick Start - Current 95W REEF LED Mini LOOP Quick Start Manual

Advertisement

INSTALLATION

4
CONNECT
1. Connect included Extension Cable to REEF LED Light.
2. Connect REEF LED light to Mini Bluetooth controller by gently
pushing LED cable into top 3-pin connector and tightening.
3. Place temperature sensor into sump or aquarium and attach
using suction cup.
4. Connect Temperature sensor to Temperature USB port located on
the bottom of controller.
5. Slide Mini Bluetooth controller into controller mount.
6. Plug 12V DC power supply into a GFCI outlet, ensuring a drip loop.
7. Connect power supply plug to controller, controller key ring will BLUE
indicating power is now ON.
5
CLEAN UP
Use cable wraps to organize excess cords, clean and maintain light every 30 days.
Regularly examine light fixture and components. Remove from service
if any salt creep, water or damage is found.
Do not lay objects on top of light, controller or power supply. Do not
stack power supplies.
Unplug lighting system from the GFCI power outlet when cleaning to
prevent any electrical shock hazards.
Regulary clean fan and heat sink fins using a can of compressed air.
Wipe system with damp cloth. DO NOT use ammonia based cleaners.
ALWAYS ensure power supply is plugged into a GFCI outlet using a drip loop.
This light is not water proof. Do not submerse or mount close to water.
CONTROLLER OPERATION AND FEATURES
Controller Key Ring displays status of controller. There are status 4 indicators:
CONTROLLER
KEY RING
INST4440 4.03.22
BLUE - Indicates normal operation. Press once to activate feed mode.
PURPLE
- Indicates controller is in manual feed mode (will resume after 10 min.)
WHITE - Indicates controller is in manual ON (Daylight setting) mode. Press
Key for 3 seconds, LED light will turn ON to Daylight setting. Press a
again for 3 seconds to resume app settings (Bluetooth.)
GREEN - LOCK feature, locks the controller settings and prevents other mobile
devices from connecting to controller. Press and hold Key for 6 sec.
to lock settings. Press and hold for 6 sec. to unlock.
RED - Voltage issue. Ensure ONLY 12VDC power is connected.

QUICK START

95W REEF LED Mini LOOP Bluetooth
REEF LED
EXTENSION
CABLE
FLEX ARM
STAND ADAPTOR
(Sold Seperately)
12V DC
POWER SUPPLY
AC Power
GFCI Outlet
FLEX ARM
(Sold Seperately)
TEMPERATURE
SENSOR
LOOP MINI
CONTROLLER
r

Advertisement

loading