Advertisement
Arize Element
L1000 Gen2
®
1.2 Selection of Mounting Hardware
Based on the cross section of the structural member select the correct hanger or mounting cable.
Unistrut 1-5/8" (41mm)
Use standard hanger 1-5/8" (41mm)
OR
Offset hanger 1-5/8" (41mm)
to clear the bottom of the Unistrut
1.3 Installation with Standard and Offset Hangers
SNAP!
Place light module hanger
1
over structural member and
snap hanger in place.
Square 2-3/4" (70mm)
Use standard hanger
2-3/4" (70mm)
Hang one fixture bracket on one hook, hang opposite fixture
2
bracket onto other hook by pressing hanger arms together.
LED.com
© 2023 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the
General Electric Company and are used under license. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
Installation Guide
Other Structural Members
Use 18" (0.5m) or 60" (1.5m)
universal cable
OR
Perpendicular (90°)
universal mounting kit
HORT158 | DOC-2000991
Page 6 of 15
(Rev 06/20/23)
Advertisement
