Download Print this page

Current Arize Element L1000 Gen2 Installation Manual page 10

Horticulture led lighting system

Advertisement

Arize Element
L1000 Gen2
®
2.2 Selection of Mounting Hardware
Based on the cross section of the structural member select the correct hanger or mounting cable.
Unistrut 1-5/8" (41mm)
Use standard hanger 1-5/8" (41mm)
OR
Offset hanger 1-5/8" (41mm)
to clear the bottom of the Unistrut
2.3 Installation with Hangers
Hang brackets of driver module
1
onto hanger and push down until
brackets snap into place.
Square 2-3/4" (70mm)
Use standard hanger
2-3/4" (70mm)
SNAP!
Hang driver bracket from one hook, then hang other driver
2
bracket end by pressing hanger arms together.
LED.com
© 2023 Current Lighting Solutions, LLC. All rights reserved. GE and the GE monogram are trademarks of the
General Electric Company and are used under license. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
Installation Guide
Other Structural Members
Use 18" (0.5m) universal cable
HORT158 | DOC-2000991
Page 10 of 15
(Rev 06/20/23)

Advertisement

loading

Related Products for Current Arize Element L1000 Gen2