Leica TL5000 Ergo Transmitted Light Base: Operation
The transmitted light base must only be
connected to a grounded socket with a
faultless power cable! Failure to observe these
warnings may result in serious personal injury
or even death!
•
The LED illumination can be very bright!
Check and adjust the intensity of the
illumination to a suitable brightness before
looking through the eyepieces.
Leica M series
Switching the transmitted light base on
and off
1. Switch on the transmitted light base with
the power switch on the rear side.
User Manual
2. Press the on/off switch on the right side
once to turn on the illumination.
Continued on next page.
49