Specification - Marta MT-IR1156A User Manual

Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 6
STEAM BURST
Make sure that there is enough water in the water tank.
Stand the steam iron on its heel rest in an upright position on an iron-safe surface and plug it in.
Set the maximum temperature.
Set the steam controller to off position.
Press the steam button
CAUTION: Hold the steam button pressing not more than 5 seconds to avoid hot liquid leakage.
CLEANING
Before cleaning the steam iron ensure it is unplugged from the power supply and has completely cooled down.
Clean the exterior with a damp cloth and wipe dry.
Do not use abrasive cleaners.
STORAGE
Unplug the steam iron from the power supply and allow cooling down completely.
Empty the water tank after each use, and then wrap the cord around the heel rest.
To protect the soleplate, place the steam iron in an upright position on its heel rest.

SPECIFICATION

Power supply: 230 V
50 Hz
~
Manufacturer:
Cosmos Far View International Limited
Room 701, 16 apt, Lane 165, Rainbow North Street , Ningbo, China
WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK COATING, RUBBER SEALS, ETC.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device. Made in China
UKR ПОСІБНИК З ЕКСПЛУАТАЦІЇ
ЗАХОДИ БЕЗПЕКИ
Уважно прочитайте дану інструкцію перед експлуатацією приладу і збережіть її для довідок надалі.
• Перед першим включенням перевірте, чи відповідають технічні характеристики виробу, зазначені в маркованні, електроживленню у Вашій локальній мережі.
• Використовуйте тільки в побутових цілях. Прилад не призначений для промислового застосування.
• Не використовуйте поза приміщеннями.
• Не залишайте працюючий прилад без догляду.
• Не використовуйте прилад з пошкодженим мережним шнуром або іншими пошкодженнями.
• Стежте, щоб мережний шнур не торкався гострих крайок і гарячих поверхонь.
• Не тягніть, не перекручуйте і не намотуйте мережний шнур навколо корпусу приладу.
• При відключенні приладу від мережі живлення не тягніть за мережний шнур, беріться тільки за вилку.
• Не намагайтеся самостійно ремонтувати прилад. При виникненні неполадок звертайтеся до найближчого сервісного центру.
• Використання не рекомендованих додаткових приналежностей може бути небезпечним або призвести до пошкодження приладу.
8

Advertisement

Table of Contents
loading

Table of Contents