Table of Contents
Advertisement
Calibrating an I/P Device
The following test allows you to calibrate a device that
controls pressure. Proceed as follows:
1.
Connect the test leads to the instrument under test as
shown in Figure 21. The connections simulate a
current-to-pressure transmitter and measures the
corresponding output pressure.
A
2.
Press
V
3.
Press
4.
If necessary, press
5.
Enter the desired current by pressing
keys. Press
information@ITM.com
(upper display).
for sourcing current (lower display).
M
for SOURCE mode.
X
Y
Z
and
to select different digits.
Fluke-Direct
W
and
Calibrating an I/P Device
.ca
1.800.561.8187
43
Advertisement
Table of Contents
