Calibrating An I/P Device - Fluke 725Ex User Manual

Calibrating an I/P Device

The following test allows calibration of a device that
controls pressure. Proceed as follows:
1. Connect the test leads to the instrument under test as
shown in Figure 21. The connections simulate a
current-to-pressure transmitter and measures the
corresponding output pressure.
A
2. Press (upper display).
V
3. Press for sourcing current (lower display).
M
4. If necessary, press
5. Enter the desired current by pressing
Y Z
keys. Press and to select different digits.
for SOURCE mode.
X W
and
Calibrating an I/P Device
45