Contrast Adjustment - Fluke 725/FPC User Manual

725
Users Manual

Contrast Adjustment

Available with V2.1 Firmware or greater. To
identify firmware version, press and hold J
when powering up. The firmware version will be
shown in the upper units display for about 1
second after initialization.
To adjust the contrast, proceed as follows:
Press C and O until Contst Adjust is displayed as
1.
shown in Figure 6.
Press and hold X to darken contrast.
2.
Press and hold W to lighten contrast.
3.
Press S to save the contrast level.
4.
16
information@ITM.com
Note
Fluke-Direct
725
MULTIFUNCTION CALIBRATOR
1
V mA ZERO
LOOP
V mA
MEAS
SOURCE
TC RTD
STORE
SETUP
RECALL
4
Figure 6. Adjusting the Contrast
.ca
2
Hz
˚ C ˚ F
100%
25%
25%
0%
3
sh06f.eps
1.800.561.8187