Table of Contents
Advertisement
• When using a pressure module, make sure the process pressure line is shut off and depressurized
before you connect it or disconnect it from the pressure module.
• Use only 4 AA batteries, properly installed in the calibrator case, to power the calibrator.
• Disconnect test leads before changing to another measure or source function.
• When servicing the calibrator, use only specified replacement parts.
• To avoid false readings, which could lead to possible electric shock or personal injury, replace the
battery as soon as the battery indicator (M) appears.
To avoid possible damage to calibrator or to equipment under test:
•
Disconnect the power and discharge all high-voltage capacitors before testing resistance or continuity.
•
Use the proper jacks, function, and range for your measurement or sourcing application.
information@ITM.com
W Warning
Caution
Fluke-Direct
Safety Information
.ca
1.800.561.8187
5
Advertisement
Table of Contents
