Testing An Output Device - Fluke 725/FPC User Manual

Testing an Output Device

Use the source functions to test and calibrate actuators,
recording, and indicating devices. Proceed as follows:
1. Connect the test leads to the instrument under test
as shown in Figure 22.
V
2. Press
frequency or resistance (lower display).
3. If necessary, press
information@ITM.com
F
for current or dc voltage, or
M
for SOURCE mode.
Fluke-Direct
for
0 to 1 V dc
Input
Figure 22. Calibrating a Chart Recorder
Testing an Output Device
725
MULTIFUNCTION CALIBRATOR
V mA
LOOP
V mA
MEAS
SOURCE
TC
Red
STORE
SETUP
RECALL
Black
.ca
1.800.561.8187
ZERO
Hz
RTD ˚ C ˚ F
100%
25%
25%
0%
sh25f.eps
45