Auto Power-Off; Auto Backlight-Off; Display Contrast Adjustment - Fluke 714B User Manual

Auto Power-Off

The Product provides an auto power-off function to save
power. When the auto power-off mode is enabled, the
Product automatically powers off after 15 minutes of
inactivity.
To enable the auto power-off mode:
1. Push .
2. When SHIFT shows on the display, push .
3. In the displayed setting list, highlight the Auto
poweroff option, and then use  to select this option.
To disable the the auto power-off mode:
1. Push .
2. When SHIFT shows on the display, push .
3. In the displayed setting list, highlight the Auto
poweroff option, and then use  to deselect this
option.

Auto Backlight-Off

The Product provides an auto backlight-off function to
save power. When the auto backlight-off mode is enabled,
the backlight automatically turns off after 2 minutes of
inactivity.
Shop for Fluke products online at:
To enable the auto backlight-off mode:
1. Push .
2. When SHIFT shows on the display, push .
3. In the displayed setting list, highlight the Auto
backlight off option, and then use  to select this
option.
To disable the the auto backlight-off mode:
1. Push .
2. When SHIFT shows on the display, push .
3. In the displayed setting list, highlight the Auto
backlight off option, and then use  to deselect this
option.

Display Contrast Adjustment

The Product allows you to adjust the display contrast.
To adjust the display contrast:
1. Push  until Measure shows on the display.
2. Push  to darken contrast, or  to lighten contrast.
MyFlukeStore
www.
Thermocouple Calibrator
Auto Power-Off
13
1.888.610.7664
.com