Keep feet and hands away
from all rotating or moving
parts.
DO NOT step or stand in
this area.
3. Danger!
Discharge Hazard –
NEVER operate unit
without discharge chute
in operating position.
Thrown objects can
cause injury or damage.
Do not operate mower
unless all guards are in
operating position or
bagger is attached.
4. HOT SURFACES!
DO NOT touch parts
which are hot from
operation. ALWAYS allow
parts to cool.
5. CAUTION!
CAUTION!
Read Owner/Operator
Manual. Allow operation
only by properly trained
adult, never children.
No smoking.
MAX. FILL
SAFETY RULES
This cutting machine is capable of amputating
hands and feet and throwing objects. Failure
to observe the following safety instructions
could result in serious injury or death.
The following safety instructions are based
on the B71.4 specifications of the American
National Standards Institute in effect at the
time of production.
Training
Read, understand, and follow all instructions
on the machine and in the manuals before
starting.
Become familiar with the safe operation of
the equipment, operator controls, and safety
signs.
Be sure the area is clear of bystanders and
pets before operating. Stop machine if
anyone enters the area.
Improper use of power equipment can cause
serious permanent injury or death to the
operator or a bystander.
Understand:
•
How to operate all controls
•
The functions of all controls
•
How to STOP in an Emergency
•
Braking and steering characteristics
•
Turning radius and clearances
Read the Operator's Manual and other
training material. If the operator(s) or
mechanic(s) cannot read English, it is the
owner's responsibility to explain this material
to them.
All operators and mechanics should be
trained. The owner is responsible for training
the users.
EN - 6
Fill fuel tank to bottom of
neck – MAXIMUM.
WARNING: Overfilling may
cause severe damage to
evaporative system!
• Never fill fuel tank
when engine is
running, hot or unit is
indoors. Never overfill
fuel tank.
• Replace fuel cap
securely and clean up
spilled fuel.