Adjusting The Hand Grip; Attaching The Hand Grip; Removing The Hand Grip - Samsung VP-D530 Owner's Instruction Book

ENGLISH
Preparation

Adjusting the Hand Grip

It is very important to ensure that the Hand Grip has been correctly adjusted before you begin your recording.
The hand grip enables you to :
- Hold the camcorder in a stable, comfortable position.
- Press the Zoom and START/STOP button without having to change the position of your hand.

Attaching the Hand Grip

1. Put the camcorder on the Hand Grip.
2. Put the screw in the Hand Grip (Tripod) hole,
and fasten the screw.
After fastening the screw, lay the screw lever for the
locking.
3. To firmly attach the camcorder to the Hand Grip,
push the holder button.
Please confirm that the camcorder is firmly fixed.
4. Pull open the Hand Strap cover and release the Hand Strap.
5. Adjust its length and stick it back onto the Hand Strap cover.
6. Close the Hand Strap cover again.

Removing the Hand Grip

1. Press the holder lever down to release the holder.
2. Loosen the screw holding the camcorder to the Hand Grip.
3. Remove the Hand Grip.
24 24
1
4
1
2
2 3
5 6