Hilti DX 6 Manual page 31

Risk of explosion with cartridges
▶ Use only cartridges that are suitable and approved for use with the fastening tool.
▶ Remove the cartridge strip when you are going to take a break and when you have finished the job, and
before you transport the fastening tool.
▶ Do not use force to remove fasteners and/or cartridges from the magazine strip or the fastening tool.
▶ Store unused cartridges in accordance with the storage specifications for cartridges for powder-actuated
fastening tools (e.g. dry, temperature between 5 °C and 25 °C) in a secured storage facility.
▶ Do not leave unused or partly used cartridge strips lying around. Collect the used cartridge strips and
store the cartridge strips at a suitable location.
▶ Follow all instructions relating to safety, handling and storage in the safety data sheet of the cartridges.
3 Description
3.1 Product overview (fastening tool)
3.2 Product overview (fastener guides)
3.3 Controls on the fastening tool
The controls on the fastening tool are as follows:
*2232121*
1
@
;
=
%
&
(
)
+
§
/
:
∙
$
£
2
@
;
=
%
&
(
Release button for selector ring for driving energy
The button unlocks the selector ring for driving energy or is used for
removal of the exhaust gas piston return unit.
2232121
Selector ring for driving energy
Guide sleeve
Exhaust gas piston return unit
Piston
Piston rings
Release button for selector ring for driving
energy
Housing
Cartridge barrel (ejection)
Operating button at display
Cartridge barrel (insertion)
Trigger
Air vents
Installation interface for accessories
Gripping surfaces
Release button (fastener guide)
Buffer
Magazine shutter
Release button (magazine shutter)
Nail detector with reload indicator (red)
Interchangeable fastener guide nosepiece
English 23