Battery General Events (Protection) - Q CELLS Q.HOME+ ESS HYB-G2 User Manual

6.8.2 Battery General Events (Protection)

WEB Display HMI Display
B01P BAT1 CHG
OC P
B02P BAT1 DCHG
OC P
B03P BAT1 CEL V
HOLD P
B04P BAT1 CEL
OV P
B05P BAT1 CEL
UV P
B06P BAT1 CEL
OT P
Type : PROTECTION
Description
BAT1 Charge Over The product stops the generating process
Current Protection because a significant protection event has
occurred. Wait until the event message
disappears. After the event message is
removed, it automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant event.
BAT1 Discharge Over The product stops the generating process
Current Protection because a significant protection event has
occurred. Wait until the event message
disappears. After the event message is
removed, it automatically returns to normal.
If it is not removed until the time limit is
reached, it is converted to a significant event.
BAT1 Cell Voltage Power reset of the system is required.
Sensing Data Hold If the symptom still occurs after reset, repair
Protection of BMS or PCS Control Board is necessary.
BAT1 Cell or Rack When the maximum cell or rack voltage is
Over Voltage above protection level, thus terminating the
Protection system.
Automatically returns to normal when the
maximum cell or rack voltage goes below
the limit value.
BAT1 Cell or Rack When the minimum cell or rack voltage is
Under Voltage below protection level, thus terminating the
Protection system.
Automatically returns to normal when the
minimum cell or rack voltage goes above
the limit value.
BAT1 Cell Over When the maximum cell temperature is
Temp Protection above protection level, thus terminating the
system.
Automatically returns to normal when the
maximum cell temperature goes below
the limit value.
Measures
Message Description
I 44