Icom IC-V82 Instruction Manual page 35

D Memory/call ➾ call/memory
qSelect the memory (call) channel
to be transferred:
➥ Push [C•
] or [B•
MR CALL
lect the memory (call) mode.
➥ Push [Y Y ] or [Z Z ] to select the
memory channel.
• When [VOL] is assigned as tuning
dial, rotate [VOL] to select the
memory channel. (pgs. 14, 63)
wPush [A•
], then push [C•
FUNC
momentarily.
• "--" and " X " blink.
ePush [Y Y ] or [Z Z ] to select the target memory.
• When [VOL] is assigned as tuning dial, rotate [VOL] to select
the target channel. (pgs. 14, 63)
r Push [A•
], then push [C•
FUNC
• Memory mode is selected and the contents are transferred to the
target memory.
] to se-
C
MR
B
CALL
]
MR
A
FUNC
] for 1 sec.
MR
MEMORY/CALL OPERATION
D Clearing a memory
qPush [A•
], then push [C•
FUNC
to enter the memory transfer
mode.
• " X " and a memory channel num-
ber blink.
wPush [Y Y ] or [Z Z ] to select the
memory channel to be cleared.
• When [VOL] is assigned as tuning
dial, rotate [VOL] to select the mem-
ory channel. (pgs. 14, 63)
• The call channel cannot be cleared.
ePerform the following operation within 1.5 sec, otherwise
the memory clearing is cancelled and the transceiver re-
turns to the memory mode.
- Push [A• ], then push [C•
FUNC
- Push [A• ], then push [C•
FUNC
• The contents of the selected memory are cleared.
r Push [D•
] to return to regular operation.
CLR
6
]
MR
C
MR
A
FUNC
] momentarily.
MR
] for 1 sec.
MR
6
23