Battery Charging - Icom IC-V82 Instruction Manual

3
BATTERY PACKS

■ Battery charging

D Regular charging with the BC-146
The optional BC-146 provides regular charging of an optional
NI-Cd battery pack with/without transceiver. The following is
additionally required:
• An optional AC adapter. (An AD-99N is supplied with BC-146.)
Turn power OFF.
• Chargeable battery
BP-209N, BP-222N
Recommendation:
Charge the BP-211N (Li-Ion) by BC-119N (or BC-121N) for
a maximum of 2 hours. Li-Ion batteries are different from Ni-
Cd batteries in that it is not necessary to completely charge
and discharge them to prolong the battery life. Therefore,
charging the battery in intervals, and not for extended peri-
ods is recommended.
10
D About AD-99N
Attach the spacer (Spacer B/C) to the adapter (Spacer A) with
orientation as illustrated in the diagram below.
Check orienta-
tion for correct
charging. (In-
sert together • Attach the spacer (Spacer B/C) to the adapter with the orientation of
with AD-99N.)
the stamp "
When removing the spacer (Spacer B/C), push the notch care-
fully with your finger to remove the spacer (Spacer B/C) from
the adapter (Spacer A).
BC-146 +AD-99N
" pointing up.
Remove the spacer (Spacer B/C)
from the adapter.
Push the notch
carefully.
R CAUTION!
DO NOT push or force the notch with a screw driver, etc., to
remove it.
DO NOT bend the notch when the adapter and spacer are not
joined together. This will cause weakening of the notch plastic.
Both cases may break the notch and it may not be able to be
reattached.