Removing The Pushing Plate Hp Sensor (Ps2) - Canon Unit-L1 Service Manual

3. Remove the Pre-registration Sensor [1].
• 1 Connector [2]

Removing the Pushing Plate HP Sensor (PS2)

■ Preparation
1. Open the Upper Cover.
2. Remove the Rear Cover."Removing the Rear Cover" on page 45
■ Procedure
1. Remove the Pushing Plate HP Sensor Unit [1].
• 2 Screws [2]
• 2 Reuse Bands [3]
• 1 Connector [4]
2. Remove the Pushing Plate HP Sensor [1].
1x
[1]
[2]
2x
2x
1x
[1]
61
4. Parts Replacement and Cleaning
[1]
[2]
[3]
[4]