TEMPLE & WEBSTER QNSTTLBG Assembly Instructions

"Read these instructions and follow steps carefully to ensure you assemble the
product correctly and avoid damages. Check that all parts and hardware have been
provided before assembling the product Place all contents on a clean, soft-flat
surface to avoid scratching the product."
Only tighten bolts to 80% at first. Once all parts have been assembled, fully tighten all hardware.
To prevent damage to threads, do not use a power tool and do not over tighten bolts.
Use two people to lift and turn the product when assembling.
Do not attempt with only one person and do not roll onto legs.
Keep all hardware and small parts away from children.

step 1

step 2

ASSEMBLY INSTRUCTIONS
QNSTTLBG

PART LIST

ITEM DESCRIPTION
A-1 SEATER
A-2 S EATER
B-1 BACKREST
B-2 BACKREST
B-3 BACKREST
C-R ARMREST-RIGHT
D-1 BACK PILLOW
D-2 BACK PILLOW
D-3 BACK PILLOW
D-4 BACK PILLOW
，

HARDWARE LIST

QTY ITEM DESCRIPTION
1 PCS F BACK LEGS
1 PCS G FRONT LEGS
1 PCS H BOLT
1 PCS I HEX KEY
1 PCS J WASHER
1 PCS K FELT PAD
1 PCS
1 PCS
1 PCS
2 PCS
QTY
4 PCS
5 PCS
6 PCS
1 PCS
6 PCS
9 PCS