Table of Contents
Advertisement
RS2056 EN
6/9/06
9:58 AM
Page 10
Getting Started
Content of Box
EN
• one main unit (with 2 main speakers);
• one remote control;
• one AM loop antennas;
• one mp3 Player;
• one pair of earphones
• one user manual;
• one safety leaflet;
• Owner registration Card.
!
Warning:
Use of this product is for your personal use
only. Unauthorized recording or duplication
of copyrighted material may infringe upon the
rights of third parties and may be contrary to
copyright laws.
Note:
Make sure the tracks are encoded in mp3 or
Windows Media formats and supported
bitrates. Bitrates supported by the player:
mp3 – 32 to 320kbps
wma – 48 to 160kbps
3
Connections of Antennas and
Speakers
1
3
2
4
1. AM Loop antenna Jacks.
2. AUX IN.
3. FM Pigtail Antenna.
4. Main Speaker Jacks.
Getting Started
Using the FM and AM Antennas
Before you use your audio system, you'll want to
make sure both the FM and AM antennas are
positioned properly. Uncoil the FM antenna at
the back of the unit, making sure it is fully
extended (you may even want to tape it to the
wall behind the unit if possible. The higher the
better.) You'll also need to connect the AM
antenna loop to the back of the unit if you listen
to AM stations. Rotate the AM loop antenna for
better reception.
Connecting the Speakers
Each speaker has a black (negative) and a red
(positive) jack. When connecting the speakers,
match the red wires to the red jacks and the
black wires to the black jacks.
Speaker Wire Connection
Push Speaker terminal tab
Release tab to lock wire in
down to insert wire.
the terminal.
NOTE: Make sure the insulation is completely removed from the
ends of the speaker wires at all connection points.
Installation
To ensure sufficient ventilation, keep the spacings
shown below free from other surfaces:
4"
Front View
4"
4"
4"
2"
Side View
4
EN
Advertisement
Table of Contents
