Do you have a question about the RS2654 and is the answer not in the manual?
Questions and answers
Yvonne
February 19, 2025
How do I get my tv to play through the speakers
1 comments:
Mr. Anderson
February 19, 2025
To set up the RCA RS2654 to play sound through the speakers, follow these steps:
1. Connect the Speakers - Each speaker has two wires: - Black (negative) / Red (positive) - Black (negative) / Purple (positive) - Match the red/purple wires to the red/purple jacks and the black wires to the black jacks on the back of the unit. - Push the speaker terminal tab down to insert the wire, then release to lock it in place. - Ensure the insulation is completely removed from the ends of the wires before connecting.
2. Connect the AM Antenna (Optional for Radio Use) - Attach the AM loop antenna to the back of the unit. - Rotate the AM loop for better reception.
3. Plug in the Power - Connect the unit to a power outlet.
4. Turn on the Unit - Press the ON/STANDBY button to power on the system.
5. Select the Audio Source - Use the controls to choose CD, radio (FM/AM), or auxiliary input.
6. Adjust Volume - Use the VOL+ or VOL- buttons to increase or decrease the volume.
Once set up, the RCA RS2654 should play sound through the connected speakers.
Page 1
It is important to read this instruction book prior to using your new product for the first time. Es importante leer este manual antes de usar por vez primera su euipo. u s e r m a n u a l RS2654...
In the event that service should be required, you Brand: RCA may need both the model number and the serial Model: RS2654 number. In the space below, record the date and place of purchase, and the serial number: Electrical Consumption: Model No.
Page 3
RS2654_EN 12/21/05 10:52 AM Page 6 Important Information Safety Precautions Important Battery Information • Never open the cabinet under any circumstances. Any • Remove the batteries to avoid leakage if you do not repairs or internal adjustments should be made only by a use your remote control for more than one month.
RS2654_EN 12/21/05 10:52 AM Page 8 Getting Started Connecting the Speakers Unpacking the system Each speaker has a black (negative) / red You should have the following: (positive) wire and a black (negative) / purple • one main unit (with 2 main speakers); (positive) wire.
Page 5
RS2654_EN 12/29/05 10:40 AM Page 10 General Controls PREV Remote Control backwards to the previous CD track; In Tuner mode - Tunes down radio frequency. OPEN/CLOSE — Opens and closes CD disc tray. SOURCE TUNER TAPE STOP — Stops playing CD. REPEAT —...
RS2654_EN 12/21/05 10:52 AM Page 12 Settings 4. Press TIMER to change to OF (timer off time) Showing Demonstration with clock time flashing. Repeat steps 2 & 3 Press DIMMER / DEMO to turn on/off for timer off time setting. demonstration in standby mode.
RS2654_EN 12/21/05 10:52 AM Page 14 CD Player Important CD and mp3/WMA Information • Use .mp3 as the extension when converting audio files into mp3 for saving onto This unit is compatible with CD-R / RW CD-R(W) or CD-ROM, e.g. Abc08.mp3. CD-RW/ CD-R discs for Do not use any other extension e.g.
Page 8
RS2654_EN 12/21/05 10:52 AM Page 16 CD Player Selecting a Disc Repeat Press DISC SKIP to skip discs. Press REPEAT on the remote control to repeat the current track (REPEAT 1), current disc (REPEAT Selecting Folders 1 DISC) , all discs (REPEAT ALL DISC), or turn (mp3 / WMA CDs repeat mode off (ALL DISC).
Page 9
RS2654_EN 12/21/05 10:52 AM Page 18 CD Player mp3/WMA Playback Sequence • Refer to the diagram below for playback sequence details on multi-level folder structure. • Songs are played before playing songs placed in folders at each level. LEVEL 1 LEVEL 2 Folder 1.1 Song 1.1.1...
RS2654_EN 12/21/05 10:52 AM Page 20 Troubleshooting Tips Problem Solution Problem System will • Check power cord for a secure CD sound not turn connection. skips • Unplug the unit for a moment, and then plug into power source again. •...
What we will do: • Pay any Authorized RCA Audio Service Center the labor charges to repair your unit. • Pay any Authorized RCA Audio Service Center for the new or, at our option, refurbished replacement parts required to repair your unit.
What we will do: • Pay any Authorized RCA Audio Service Center the labor charges to repair your unit. • Pay any Authorized RCA Audio Service Center for the new or, at our option, refurbished replacement parts required to repair your unit.
Need help?
Do you have a question about the RS2654 and is the answer not in the manual?
Questions and answers
How do I get my tv to play through the speakers
To set up the RCA RS2654 to play sound through the speakers, follow these steps:
1. Connect the Speakers
- Each speaker has two wires:
- Black (negative) / Red (positive)
- Black (negative) / Purple (positive)
- Match the red/purple wires to the red/purple jacks and the black wires to the black jacks on the back of the unit.
- Push the speaker terminal tab down to insert the wire, then release to lock it in place.
- Ensure the insulation is completely removed from the ends of the wires before connecting.
2. Connect the AM Antenna (Optional for Radio Use)
- Attach the AM loop antenna to the back of the unit.
- Rotate the AM loop for better reception.
3. Plug in the Power
- Connect the unit to a power outlet.
4. Turn on the Unit
- Press the ON/STANDBY button to power on the system.
5. Select the Audio Source
- Use the controls to choose CD, radio (FM/AM), or auxiliary input.
6. Adjust Volume
- Use the VOL+ or VOL- buttons to increase or decrease the volume.
Once set up, the RCA RS2654 should play sound through the connected speakers.
This answer is automatically generated