Table of Contents
Advertisement
If gun's neck gets too worn or damaged, you can replace it by unscrewing it from the gun
body and replacing with a new one.
Check the tightness of the neck daily. A loose neck can cause voltage loss and excess heat in
NOTE!
the gun body.
If you wish to lock the neck in its position, open the torx screw under the rubber collar of the
bending support and remove one of the three washers.
If the neck is locked, remember to loosen the torx screw before trying to unscrew the neck.
NOTE!
© Kemppi Oy / 1131
EN
9
Advertisement
Table of Contents
