Table of Contents
Advertisement
Available languages
Available languages
flat and stable surface. Do not move the product from
above the container for the entire duration of the op-
eration. Keep away from the fabrics to avoid the risk
of staining them.
1.
Make sure that the appliance is disconnected
from the power outlet.
2.
Fill the water reservoir (7) up to the maximum
filling level (6).
3.
Plug the appliance into a power outlet.
4.
Place the product above a container and press
the programme selector button (1) for at least 5
seconds.
5.
The limescale indicator light (13) will start flash-
ing for roughly 3 minutes, while all the other
lights are turned off, until the descaling cycle ter-
minates with the discharge of water, steam and
possible limescale residues from the soleplate.
6.
At the end the cycle, the limescale indicator light
(13) switches off and the iron returns to the previ-
ously set programme.
TIPS
•
Make sure to check the garment label to deter-
mine the type of fabric then select the most ap-
propriate programme.
•
Sort the garments according to the type of fab-
ric. This will reduce the need to adjust the pro-
gramme according to the various fabrics.
•
Start with garments that require a lower ironing
temperature and continue with those requiring
higher ironing temperatures.
•
If you unsure about the fabric of a garment, try
ironing a small hidden part such as a seam, hem
or non-visible inner section. Start with a low-
temperature programme and gradually increase
it until you find the optimal ironing setting.
•
When switching from a high-temperature pro-
gramme to a programme for ironing delicate gar-
ments, wait approximately 2 minutes to let the
iron reach the new settings.
•
Pure wool (100% wool) garments can be steam-
ironed as long as the wool programme is select-
ed. We recommend using a cotton cloth to avoid
leaving any shiny marks on the garment.
•
Do not iron areas with evident signs of sweat or
stains: the heat will cause the stains to set and
become permanent.
SAFEGUARDING THE ENVIRONMENT
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recycla-
ble and is marked with the recycle symbol
(*). The various parts of the packaging
must therefore be disposed of responsi-
bility and in full compliance with local au-
thority regulations governing waste disposal.
SCRAPPING OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recycla-
ble or reusable materials. Dispose of it in
accordance with local waste disposal regu-
lations. For further information on the tre-
atment, recovery and recycling of household
electrical appliances, contact your local authority, the
collection service for household waste or the store
where you purchased the appliance. This appliance is
marked in compliance with European Directive
2012/19/EU,
Waste
Equipment (WEEE). By ensuring this product is di-
sposed of correctly, you will help prevent negative
consequences for the environment and human he-
alth. The (*) symbol on the product or on the accom-
panying documentation indicates that it should not be
treated as domestic waste but must be taken to an
appropriate collection center for the recycling of elec-
trical and electronic equipment.
Electrical
and
Electronic
en
21
21
Advertisement
Table of Contents
