Table of Contents
Advertisement
Quick Links
Book Stand
Instruction Manual
SKU: STAND-BK01B,W
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-bk01b
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vivo STAND-BK01B
Summary of Contents for Vivo STAND-BK01B
- Page 1 Book Stand Instruction Manual SKU: STAND-BK01B,W Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-bk01b GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com 309-278-5303 Chat live with an agent!
- Page 2 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury.
- Page 3 ASSEMBLY STEPS STEP 1 Remove adhesive backing from Pads (K) and apply them to the underside of Base (C). STEP 2 Connect Pole (A) to Base (C) using Support Plate (G), M10x30mm Screw (S-B), and 6mm Allen Wrench (T-B).
- Page 4 STEP 3 Turn asssembly over and slide Pole Cable Clip (I), Arm (B), and Pole Cap (F) onto Pole (A). Secure Arm (B) using 6mm Allen Wrench (T-B). Place Cable Clip (H) onto Arm (B). STEP 4 Connect Page Clips (J) to Tray (D) using ST3.5x10mm Screws (S-A) and a Phillips screwdriver.
- Page 5 STEP 5 Place VESA Plate (E) on to the back of Tray (D) and secure using ST3.5x10mm Screws (S-A) and a Phillips screwdriver. Remove Security Nut (B1) from Arm (B) and slide Tray (D) with VESA Plate (E) onto Arm. Secure using Security Nut (B1).
- Page 6 STEP 6 Place book on assembled stand. Adjust Page Clips (J) as needed to hold pages.
- Page 7 Articulation Tray can be rotated and positioned as needed. If assembled stand is not holding desired position, tighten Adjustment Screw (B2) using 5mm Allen Wrench (T-A). WARNING: TO AVOID TIPPING, the arm should only be used while positioned directly over the base.
- Page 8 : 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the STAND-BK01B and is the answer not in the manual?
Questions and answers