Advertisement
Rack-Mount Warnings
Warning
Warning
Rack-Mount Warnings
Take note of the following rack-mount safety warnings.
Warning
Warning
Warning
Warning
Install Cisco NCS 1010 on an EIA/ANSI/ETSI Rack
Use this task to mount the Cisco NCS 1010 chassis on an EIA/ANSI/ETSI rack.
Install Cisco NCS 1010
12
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
To reduce risk of electric shock, when installing or replacing the unit, the ground connection must
always be made first and disconnected last. Statement 1046
Two people are required to lift the heavy parts of the product. To prevent injury, keep your back
straight and lift with your legs, not your back. Statement 164
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special
precautions to ensure that the system remains stable. The following guidelines are provided to ensure
your safety:
• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.
• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with
the heaviest component at the bottom of the rack.
• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
the unit in the rack.
Statement 1006
To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
handles on modules, such as power supplies, fans, or cards. These types of handles are not designed to
support the weight of the unit. Statement 1032
To reduce the risk of fire or bodily injury, do not operate the unit in an area that exceeds the maximum
recommended ambient temperature of 40 degree Celsius. Statement 1047
Install Cisco NCS 1010
Advertisement
