Basic Operation - Sonoro Maestro SO-1010 Operating Manual

4

Basic operation

To turn on
To turn off (standby
mode)
To directly select a
playback mode
To playback a CD
To eject a CD
To control the volume
Pairing with
a Bluetooth
headphone, for the
first time
90
Press .
MAESTRO starts operation from the last selected
playback mode.
Press .
The time and date (if set) are displayed.
MAESTRO will automatically change to Standby mode
without playback and operation after 15 minutes.
Press the direct operation mode key on the remote
control or the front panel to directly switching from one
operation mode to the other.
Insert CD disc in CD slot and MAESTRO starts playing
the CD.
Press the eject button (⏏) on MAESTRO.
Press or on the remote control or rotate the volume
knob on MAESTRO.
In all operation modes except the Bluetooth mode,
press and hold key on remote control. Or, press
SETUP once, then
rotate the navigation knob) to select [Bluetooth
headphone], then select [Bluetooth pairing], then
[Available devices], and then press OK to confirm.
Wait for your Bluetooth device name to be shown on
the display and then press OK to select it.
When the small Bluetooth headphone icon
blinking, MAESTRO is in pairing mode. The Bluetooth
headphone icon
completed. The paired Bluetooth headphone device
name is temporarily shown on the display.
Note: Make sure that your Bluetooth headphones are
already in discovery mode and ready for pairing.
For more details, please refer to your Bluetooth device
instruction manual.
or on the remote control (or
stops blinking when the pairing is
© sonoro audio GmbH 2023
is