System Settings; Accessing The System Settings; Equalizer - Sonoro Maestro SO-1010 Operating Manual

20 System Settings

20.1

Accessing the system settings

• Press SETUP in any playback mode and then select [System Settings].
• Refer to the chapters below for details of each setting option.
• The current settings (if applicable) are marked with an asterisk (*).
• See chapter "Using the menus" for browsing and making selections in the
system settings.
20.2

Equalizer

Select one of the sound equalizer options to adjust the sound according to your
taste.
• [Loudness]
Loudness on, it adapts the treble and bass levels to suit the current volume,
so that delicate sounds can still be heard clearly when you listen to your music
quietly.
• [Bass]
Adjust the bass level to tailor the sound of the audio playback.
• [Treble]
Adjust the treble level to tailor the sound of the audio playback.
• [Balance]
Adjust the sound balance between the left and right of amplifier outputs.
• [Speakers]
Select the connected speakers' size to match with MAESTRO.
• [Max. Power]
Suitable for large speakers with high power capability (full frequency
response; no limiter)
• [Medium Power]
Suitable for speakers with medium power capability (full frequency
response; limited to 100W@4Ohm or 50W@8Ohm)
• [2.1 System]
Suitable for 2.1 sound systems (the amplifiers of MAESTRO are operated
with Linkwitz 2nd order high pass filter; no power limiter).
116 © sonoro audio GmbH 2023