Table of Contents
Advertisement
Available languages
Available languages
•
[Crossover frequency]
Select the desired crossover frequency (80Hz are default).
See also chapter 3.6.
•
[Room correction EQ]
With this function, the room correction can be switched on or off. For more
details, see chapter 22.
20.3
Network
•
[Network wizard]
To establish network connection.
•
[WPS WLAN Setup]
Select this option if your wireless router supports both WPS and PBC setup
methods.
•
[View Settings]
To view the current network information.
•
[Manual Settings]
Under the [Wireless] option, select [DHCP enable] to allocate IP address
automatically or [DHCP disable] to do it manually.
•
[NetRemote PIN setup]
To set up a NetRemote PIN.
•
[Network Profile]
To display a list of networks saved by MAESTRO.
•
[Clear Network Setting]
To clear all network settings.
•
[Keep Network Connected]
To keep the WLAN network connected or not. If [YES] is selected, this allows
you to wake MAESTRO from standby using a remote app. If [NO] is selected,
this will switch OFF the WLAN network connection in standby mode.
© sonoro audio GmbH 2023
GB
117
Advertisement
Chapters
Table of Contents
