Replacing The Battery In The Remote Control; Using The Antennas - Sonoro Maestro SO-1010 Operating Manual

3.3

Replacing the battery in the remote control

1. Press and hold the release tab in the direction indicated by
battery holder out in the direction indicated by
2. Insert the battery CR2032, 3V with the label (+) side up.
3. Slide the battery holder into the remote control until it locks.
Release tab
3.4

Using the antennas

1. The scope of supply contains a cable antenna and a rod antenna. For optimum
radio reception, one of the two antennas must be used.
2. Screw the rod antenna onto the FM/DAB antenna connector located on the
back of MAESTRO.
82
Battery holder
CR2032 Lithium battery
; and slide the
.
© sonoro audio GmbH 2023