Performing Initial Setup - Sonoro Maestro SO-1010 Operating Manual

1. After completing all connections, insert the power plug into the power outlet
with correct phase.
Power cord
2. Switch on the mains power, switch on MAESTRO.
3.9

Performing initial setup

When MAESTRO is powered on for the first time, the "Language" (to be used in the
display) selection shows on the display. Then, the "Setup wizard" appears on the
display. Follow the instructions below to configure some initial settings.
1. When the "Setup Wizard" is displayed, press
(or rotate the navigation knob) to select "YES" and then press OK to start the
setup.
2. You are then prompted to select:
• Time format (12 or 24-hour),
• Source of time & date auto update (Update from Radio, Internet or no update).
88
To household power outlet
(AC 230V, 50Hz)
or on the remote control
© sonoro audio GmbH 2023