Getting Started; Unpacking Maestro; Preparing The Remote Control - Sonoro Maestro SO-1010 Operating Manual

3

Getting started

3.1

Unpacking MAESTRO

1. Take MAESTRO out of the packaging and check whether MAESTRO or the
individual parts are damaged. If this is the case, do not use MAESTRO. Should
you detect any damage, contact your dealer or sonoro audio GmbH customer
support immediately.
2. Check to make sure that the delivery is complete (see chapter "Scope of
delivery").
3. Place MAESTRO in a suitable location. If you want to put your MAESTRO on
a natural wood surface, please make sure that it is suitable. Oiled or waxed
surfaces may cause stains.
4. Remove the protective film from the display.
3.2

Preparing the remote control

Insulation strip
Do not block the infra-red sensor on the MAESTRO and the infra-red transmitter
on the remote control during use.
© sonoro audio GmbH 2023
GB
81