Phono Mode; Operation; Setup Menu - Sonoro Maestro SO-1010 Operating Manual

17 Phono mode

17.1

Operation

Your turntable must be connected to the phono input jack of MAESTRO with an
audio cable (not supplied).
To access PHONO
mode,
To start and control
playback,
To mute or restore the
sound output,
17.2

Setup menu

Press SETUP in the Phono input mode to access the setup menu (see chapter
"Using the menus"). The following options are available and the current settings
(if applicable) are marked with an asterisk (*).
• [Phono noise reduction]
Turn on "Phono bypass playback" to reduce hum and noise artifacts. Phono
input will bypass DSP and go directly to volume control.
• [Bluetooth headphone]
To connect or disconnect to Bluetooth headphones, see chapter "Basic
operation".
• [System Settings]
See chapter "System Settings".
• [Main menu]
To access other playback modes or sleep timer.
The equalizer setting is not active when noise reduction is activated.
© sonoro audio GmbH 2023
Press PHONO key on MAESTRO or the remote control.
Perform all playback operations on the external player.
Press or button.
GB
111