Connecting Pre-Out Jacks / 2.1 System - Sonoro Maestro SO-1010 Operating Manual

When connecting the speaker cable, take notice of the following:
• Do not let the bare wires of the speaker cable touch one another.
• Do not let the bare wires of the speaker cable come into contact with
MAESTRO's rear panel and screws.
Using a banana plug
1. Tighten the knob
2. Insert the banana plug into the end of the terminal.
Banana plug
3.6

Connecting PRE-Out jacks / 2.1 System

The pre-outs allow you to connect active subwoofers, another power amplifier,
mixer, recorder, etc.
The following illustration shows how to connect an active subwoofer to MAESTRO.
Select the option 2.1 System in the EQUALIZER menu. Then choose at MAESTRO
the same crossover frequency as on your active subwoofer.
© sonoro audio GmbH 2023
GB
85