Connecting A Record Player - Sonoro Maestro SO-1010 Operating Manual

MAESTRO allows you to select the following crossover frequencies: 60Hz, 70Hz,
80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 140Hz 160Hz and 180Hz.
Choose a low frequency, e.g., 60Hz, for very large subwoofers and higher
frequencies for smaller subwoofers. Follow the instructions and recommendations
of your subwoofer.
Select one of the crossover frequencies and confirm with the "OK" button.
The speakers connected to the MAESTRO (L and R) are then operated via a Linkwitz
high pass filter 2nd order.
This has the advantage that the L and R speakers are relieved of low tones, and the
entire 2.1 system gains dynamic and maximum volume.
Adjusting the volume, loudness and tone on MAESTRO has effect on
the PRE-OUT jacks.
3.7

Connecting a record player

Record players with MM cartridge can be connected directly to MAESTRO.
Please connect as shown below.
86
GND
L R
Record player
(MM cartridge)
© sonoro audio GmbH 2023