Description Of Parameters; Parameters Table - Full Gauge Controls Microsol BMP Advanced c-o-n-n-e-c-t Manual

8.2 DESCRIPTION OF PARAMETERS

CODE - Access code:
It is necessary when you want to change the configuration parameters. To only visualize
the adjusted parameters it is not necessary to insert this code.
Code 231 - Technician
Code 123 - Advanced
TC.01 - Controller language:
Selects the language for displaying messages on the controller:
PORT = Portuguese;
ESP = Spanish;
ENG = English.
TC.02 - Temperature unit:
Selects the controller temperature unit:
°C = Celsius;
°F = Fahrenheit.
Note: When the unit is changed, the controller goes into pause mode and reconfigures
the parameters for the new unit, restarting the operation soon after.
TC.03 - Type of fluid:
Informs the type of fluid used in the collector. Information used to estimate the amount
of energy absorbed by the solar heating system:
WATE = water;
GLYC = propylene glycol solution.
TC.04 - Estimated pump flow:
Informs the estimated flow rate of the pump. Information used to estimate the amount
of energy absorbed by the solar heating system.

9.1 PARAMETERS TABLE

AVANÇADO
FUN DESCRIPTION
CODE Access code
Differential (T1-T2) to start the pump
DF.01
Differential (T1-T2) to turn off the pump
DF.02
Minimum T2 (pool/reservoir) superheat temperature setpoint
DF.03
allowed to the user
Maximum superheat temperature setpoint T2 (pool/reservoir)
DF.04
allowed to the user
T2 superheat temperature to turn off the pump
DF.05
T2 superheat temperature hysteresis to restart the pump
DF.06
Antifreeze temperature T1 to start the pump
DF.07
Minimum antifreeze time
DF.08
T1 superheat temperature to turn off the pump
DF.09
Pump on time in manual mode
DF.10
Temperature sensor T3 to turn off cooling in Holidays mode
DF.11
Minimum temperature T1 to start the pump - scan mode
DF.12
Pump on time - scan mode
DF.13
Pump off time - scan mode
DF.14
Maximum differential (T1-T2) for thermal shock protection
DF.15
Circulation pump type
DF.16
Setpoint diferencial (T1-T2) (bomba de velocidade variável)
DF.17
Increment rate (variable speed pump)
DF.18
Minimum pump speed (variable speed pump)
DF.19
Maximum pump speed (variable speed pump)
DF.20
Pump start time at full speed (variable speed pump)
DF.21
Auxiliary 1 operating mode
A1.01
Auxiliary 1 reference temperature sensor
A1.02
Minimum temperature setpoint of auxiliary 1 allowed to the
A1.03
user
Maximum temperature setpoint of auxiliary 1 allowed to the
A1.04
user
Auxiliary 1 temperature setpoint
A1.05
Auxiliary 1 temperature setpoint Economic
A1.06
Auxiliary 1 operating hysteresis
A1.07
Auxiliary 1 manual activation time
A1.08
Cyclic timer on time / scan time (recirculation)
A1.09
TC.05 - Flow unit (volume):
Defines the desired flow unit to display the estimated energy absorbed by the solar
heating system.
TC.06 - Power unit:
Selects the desired energy unit to display the estimated energy absorbed by the solar
heating system.
9. SETTINGS - ADVANCED LEVEL
Access the settings menu by pressing the SET key for 4 seconds. Then CODE will
appear and then press the SET key again, short press. Use the
the access code value, 123, and when ready press the SET key again (short press). Use
the
possible to edit its value. Use the
give a short press on the SET key to memorize the set value and return to the functions
menu. To exit the menu and return to normal operation (temperature display) press the
SET key (long press).
When accessing the adjustment of a parameter, the display will be flashing indicating that
it is SET possible to change the parameter value.
If you have not entered code 123, the adjustment will be locked and when pressing the
1111and
Cod X
to change the function value, the controller will display the message
display and it will not be possible to adjust the parameter.
CELSIUS
MINIMUN MAXIMUN UNIT
0 9999
°C
1.0 40.0
°C
1.0 40.0
°C
-20.0 DF.04
°C
DF.03 105.0
°C
DF.03 DF.04
°C
0.1 20.0
°C
OFF(-20.0) 10.0
seconds
OFF(0) 600
°C
0.0 200.0
minutes
1 720
°C
0.0 105.0
°C
0.0 105.0
seconds
OFF(9) 999
minutes
1 999
°C
OFF(0.0) 200.0
STD LIN
°C
1.0 40.0
°C
1.0 20.0
%
30 DF.20
%
DF.19 100
seconds
5 300
OFF REF
S1 S4
°C
-20.0 A1.04
°C
A1.03 105.0
°C
A1.03 A1.04
°C
A1.03 A1.04
°C
0.1 20.0
minutes
OFF(0) 9999
seconds
OFF(0) 9999
keys to select the desired function. With a short press on the SET key it is
11 or D
or
keys to change the value of the function, the controller will show the message
on the display. With the function lock active, when pressing the
DEFAULT MINIMUM
-
0 0
8.0 1.0
4.0 1.0
-20.0 -4.0
105.0 DF.03
70.0 DF.03
2.0 0.2
8.0 OFF(-4.0)
60 OFF(0)
70.0 32.0
360 1
50.0 32.0
32.0
35.0
20 OFF(9)
30 1
OFF(0.0) OFF(32.0)
-
STD STD
10.0 1.0
1.0
1.0
30 30
100 DF.19
10 5
-
HOT OFF
-
S3 S1
0.0 -4.0
105.0 A1.03
45.0 A1.03
40.0 A1.03
1.0 0.2
120 OFF(0)
OFF(0) OFF(0)
or keys to enter
keys to change the value, and when ready,
and
FAHRENHEIT
MAXIMUN UNIT DEFAULT
-
9999 0
°F
72.0 14.4
°F
72.0 7.2
°F
DF.04 -4.0
°F
221.0 221.0
°F
DF.04 158.0
°F
36.0 3.6
°F
50.0 46.4
seconds
600 60
392.0 °F
158.0
minutes
720 360
°F
221.0 122.0
°F
221.0 95.0
seconds
999 20
minutes
999 30
°F
392.0 OFF(32.0)
-
LIN STD
°F
72.0 18.0
°F
36.0 1.8
%
DF.20 30
%
100 100
seconds
300 10
-
REF HOT
-
S4 S3
°F
A1.04 32.0
°F
221.0 221.0
°F
A1.04 113.0
°F
A1.04 104.0
°F
36.0 1.8
minutes
9999 120
seconds
9999 OFF(0)
keys
on the