Full Gauge Controls TO-711F Quick Start Manual

Have this manual in your hand
using the FG Finder app.
BEFORE INSTALLING THE CONTROLLER, WE RECOMMEND THAT YOU FULLY READ THE INSTRUCTION
MANUAL TO PREVENT POSSIBLE DAMAGE TO THE PRODUCT.
THROUGH CONTINUOUS DEVELOPMENT, FULL GAUGE CONTROLS RESERVES THE RIGHT TO CHANGE
THIS MANUAL INFORMATION AT ANY TIME WITHOUT PRIOR NOTICE.
THIS CONTROLLER IS NOT RESPONSIBLE FOR SAFETY WITH RESPECT TO ANY FLAME SENSOR, GAS
VALVE, OR SPARK IGNITER OF WHICH NEED TO HAVE SAFETY CERTIFICATES (RECOGNIZED IGNITION AND
GAS MODULE) IN ITS APPLICATION FOR FINAL USE. THE FLAME SENSOR, THE GAS VALVE OR SPARK
IGNITER IN THIS CONTROL WILL BE CONSIDERED SEPARATELY FROM THE THERMON CONTROLLER.
1. DESCRIPTION
Thermostat and timer for the automation of forced convection ovens. This model provides control over gas,
electric, or wood powered ovens, configured through the setup menu. The preset mode provides 20
configurations to control the temperature, cooking time, and steam injection, making the oven ready for the most
varied types of cooking. TO-711F allows reversing the rotation direction of the fan to improve the uniformity of
the roast. The instrument, however, controls steam injection and lighting in the oven, and has an internal audible
alarm (buzzer) that signals, for example, the end of the roasting process. It also allows for the use of an external
audible alarm and temperature sensor for thermal protection of the fan, preventing it from overheating. The
ThermOn line is developed and produced with high-quality raw materials and stands out for its unique and
distinctive design and intuitive, user-friendly interface to facilitate its operation and configuration. It offers a
functions lock feature to prevent third parties from changing the parameters, air-tight front panel that provides
high protection against the entry of dirt and moisture, and more. Product conforming to UL Inc. (United States and
Canada).
2. APPLICATIONS
Baking ovens, stoves;
3. TECHNICAL SPECIFICATIONS
Power supply / Approximate consumption
Operating temperature / Control temperature
Temperature sensor
Thermal protection sensor
Resolution
Digital Input
Flame sensor
Relay outputs
External audible alarm (buzzer) outputs
Product dimensions / Cutout dimensions (mm)
Operating humidity
Ratings outputs for UL Applications
1 A Resistive,100,000 Cycles
Resistance 1 / Gas 1 / Alarm 1
0.5 A Pilot load, 100,000 Cycles
1/8 HP, 100,000 Cycles
Resistance 2 / Gas 2 / Alarm 2
1 A General purpose, 100,000 Cycles
1/8 HP, 30,000 Cycles
Steam valve / Ignition
0.5 A Pilot load, 30,000 Cycles
1 A General purpose, 100 Cycles
Lightbulb
1 A Tungsten, 30,000 Cycles
1/8 HP, 30,000 Cycles
Fan 1 / Fan 2
0.5 Pilot load, 30,000 Cycles
4. INTRODUCTION
Heating on indication LED;
Fan on indication LED;
TO-711F
Timer activated LED
indicator;
Steam output on LED
SET
indicator;
Quick touch: Temperature
a n d c o o k i n g t i m e
adjustment;
SET
Press and Hold: Access to the
advanced configuration;
Quick touch: Preset selection;
REC
Press and Hold: Preset configuration;
Quick touch: Steam activation;
Press and Hold: Steam activation time
adjustment;
* When the stand-by mode is enabled (I09 = YES)
OVEN TIME AND TEMPERATURE CONTROLLER
Heating Steam Lighting Fan
TO711F: 85~240Vac ± 10% (*) (50-60Hz) / 10VA
TO711FL: 12~24Vac/Vdc + 10% / 10VA
0 to 131ºF (0 to 55°C) / 14 to 932°F (-10 to 500°C)
Type J or K thermocouple (sold separately)
Fan PTC (sold separately)
E1: door micro switch input
E2 : flame sensor input
7 relay outputs: 5 (3)A / 250Vac 1/8HP
75 x 75 x 100 (WxHxD) / 67.2 x 67.2
10 to 90% UR (without condensation)
TO711F
240 Vac
240 Vac
240 Vac
240 Vac
240 Vac
240 Vac
240 Vac
240 Vac
240 Vac
240 Vac
Lower display: Indicates the cooking time or parameter
configuration;
Upper display: Indicates the
temperature measured by the
sensor or parameter configuration;
Te m p e r a t u r e u n i t s L E D
indicator;
Functions lock LED indicator;
REC
Preset use LED indicator;
Quick touch: Decreases parameter
value when in programming mode;
Press and Hold: Activates or
deactivates the controller stand-by;
Quick touch: Increases parameter value
when in programming mode;
Press and Hold: Activates or deactivates
turbine output;
Quick touch: Timer activation;
KEY FUNCTIONS
SET
Each key has an LED to indicate its
LED
function. When the LED is on, it
KEY
indicates that the key is active and
can be pressed.
TO-711F
Buzzer Timer Presets Functions
Block programming
5. INSTALLATION CONFIGURATION
Access the installation configuration menu by pressing the
[Func]is displayed. When [CoD] is displayed press the
the< or > keys to enter the access code 231 and press
Use the < or > keys to select the desired function. The value can be edited with a quick touch on the
Use the< ou > to change the value and press the
configured value and return to the functions menu. To leave the configuration menu and return to the normal
operating mode(temperature indication), press
5.1 Installation setup table
FUN FUNCTION
[CoD] Access Code (231)
Oven type selection
[i01]
[i02]
Temperature sensor type
U n i t s e l e c t i o n o f
[i03]
temperature
Language selection
[i04]
Enables external sound
[i05]
1ºC / 1ºF
alarm (buzzer)
I n t e r n a l a u d i b l e a l a r m
12Vcc / 30mA (max)
[i06]
(buzzer) volume
TO711FL
[i07] Door digital input signal type
24Vac / Vdc
24Vac / Vdc
24Vac / Vdc
24Vac / Vdc
24Vac / Vdc
24Vac / Vdc
[i08] Enable fan thermal protection
24Vac / Vdc
24Vac / Vdc
24Vac / Vdc
Enables stand-by oven
[i09]
24Vac / Vdc
functionality
6. OPERATION
6.1 Oven: electric
In this operating mode the controller keeps the heating output on until the oven reaches the oven temperature
setpoint (SP). The heating output will be activated again when the temperature drops below the setpoint minus
the hysteresis (F04).
6.2 Oven: gas
In this operating mode the controller automates / monitors the flame ignition and thus the heating of the oven
through the activation of the gas output, ignition module, and flame sensor input. The controller keeps the heating
on until the oves reaches the oven temperature setpoint (SP).
Heating will be activated again when the temperature drops below the setpoint minus the Hysteresis (F04).
The controller permanently monitors the flame sensor to ensure the safe operation of the gas-fired oven. In this
way, if there are any abnotmalities, errors Er4 - Flame Sensor shorted with the burner and Er5 - Lack of
Flame are indicated. For more information, check item 9 (Signaling).
6.3 Oven: wood
In this operating mode the heating output works as an upper threshold alarm, indicating when the temperature
exceeds the value adjusted in Oven Temperature setpoint (SP). The audible alarm is also activated to warn the
user about the overheating. The output and audible alarm are switched off when the temperature drops below the
Oven Temperature setpoint (SP) inus the Hysteresis (F05) or when the
pressed.
6.4 Default Mode (standard)
In this operating mode the controller performs the gas type control, however the flame sensor is ignored and the
!
controller will not monitor flame presence. The controller will not detect errors Er4 - shorted flame sensor and
Er5 - out of gas, resulting in an operating with less safety. NOTE: The Default Mode (standard) of operation is
available only when the type of oven is adjusted as gas. To execute this operating mode, check item 7.5 Enable
Default (standard) Mode of operation.
IN THIS OPERATING MODE THE FLAME SENSOR IS IGNORED AND THE CONTROLLER WILL
NOT DETECT THE PRESENCE/LACK OF FLAME, BEING ESSENTIAL FOR THE OPERATOR TO
PAY SPECIAL ATTENTION TO THE CONTROL OF THE OVEN IN ORDER TO PREVENT GAS
ACCIDENTS.
IP 65
FRONT
Serial Protection
level
dsse SET key with a quick touch when ready to save the
(press and hold) until [----] is displayed.
dddd SET
DESCRIPTION
Required when you want to change
installation setup parameters.
Selects the control type of the oven:
[ELE,]= Electric Oven
[GAS,]= Gas-fired Oven
[LEN,]= Wood-fired Oven
Defines the type of temperature sensor to
be used with the controller.
Selects the temperature unit the controller
will use for its operation
Selects the language the controller will use
to display messages:
[Port]= Portuguese
[,EnG]= English
[,ESP]= Spanish
Enables or disables the external audible
alarm (buzzer). If enabled, the internal
audible alarm (buzzer) will be disabled.
Selects the sound intensity of the internal
audible alarm (buzzer)
[Min,]= low volume
[Med,]= medium volume
[HiGh]= high volume
[,NO,]- normally open contact (NO)
[,NC,]- normally closed contact (NC)
If enable, monitors fan temperature. In
case of overheating, enters error mode,
switching off the outputs of the controller.
[ON,]= Fan thermal protection enable
[OFF]= Fan thermal protection disable.
Enables stand-by mode (switching off
control functions)
E251415
dddd key for 4 seconds until
SET
dsdet SET key again (quick touch). Use
dddd SET (quick touch) again when ready.
dddd SET key.
MIN MAX UNIT DEFA
-
0 9999 0
-
ELE LEN GAS
-
tc_J tc_H tc_J
-
ºC ºF °C
-
PORT ESP PORT
-
OFF ON OFF
-
MIN HIGH HIGH
-
NO NC NO
-
OFF ON ON
-
NO YES NO
dddd SET key in the controller's front panel is